High Density Set
This product is only sold to certified installers/distributors.
Premium Ceramic Coating for Ultimate Shine and Protection with Extreme Hydrophobic and Self-Cleaning Performance.
ULGO® High Density is the pinnacle of painted surface protection, utilizing advanced nano-ceramic technology and a unique two-layer structure to achieve unmatched molecular density. This innovative design enhances gloss, sheen, and surface smoothness, while providing exceptional weather resistance, chemical resilience, and stain protection. The deep luster and film texture are complemented by superior hydrophobic performance, ensuring that dirt and water are easily repelled, keeping your vehicle looking pristine for extended periods.
Size: 30ml
| Water repellency | ★★★★★ |
| Water repellent durability | ★★★★★ |
| Gloss | ★★★★☆ |
| Smoothness | ★★★★☆ |
| UV resistance | ★★★★★ |
| Chemical resistance | ★★★★★ |
| Applicable Material |
Paint Surface |
|---|---|
| Application |
Exterior |
| Series |
Premium |
| Industrials |
Automotive ,Aviation ,Marine |
A-Liquid: Ceramic raw material, special antifouling nano-dispersion additive, polyfluorine-based ceramic resin water repellent, low viscosity silicon oil.
B-Liquid: Ceramic raw material, special antifouling dispersant, low-molecular silane, hydrocarbon solvent (hydrocarbons)
- After the final polishing of the body, apply ULGO® Degreaser generously onto a microfiber cloth and wipe off any remaining compound on the surface.
- Apply ULGO® Primer evenly across the entire body using a double-action polisher with a dedicated soft urethane buff attached. Then, wipe off with a microfiber
cloth. - Wash the entire body of the car with ULGO® Maintenance Shampoo, rinse thoroughly with water, and ensure thorough drying.
- Apply Component A liquid generously onto the included microfiber applicator sponge and spread a thick layer. Work on a panel-by-panel basis. After application,
wait for 3 to 5 minutes and then wipe off the applied panel with a microfiber cloth. (Conduct a test application and adjust the best application method according to
the working environment. Recommended settings are typically room temperature of 13°C to 26°C and humidity of 40% to 50%.) Ensure to wipe off cleanly without leaving any residue of the product. - Once the application of Component A liquid is completed, wait for at least 2 hours in a dust-f ree, ventilated room. (While not mandatory, it is recommended to
proceed with the next step the following day for optimal results.) - Apply Component B liquid generously onto the included microfiber applicator sponge and spread a thin layer. Work within an area of approximately 800mm2. After application, immediately wipe clean with a dry microfiber cloth to ensure no residue of the product remains. (Applied as a finishing coat.)
- Once the application of B-Liquid is completed, allow to dry for more than 24 hours in a dust-free, ventilated room.
- Be sure to wear a mask, rubber gloves, etc. before use.
- Firmly secure the cap of the product after use and store it appropriately.
- If the medicine accidentally gets into your eyes, immediately wash out with plenty of water and see a doctor immediately.
- If swallowed by mistake, take 1 to 2 glasses of water or milk and consult a doctor immediately.
- Store between 5 to 25°C. Do not freeze.
- Keep away from sources of ignition, electrical appliances, places prone to static electricity, or anything that could cause a fire.
- Keep out of reach of children.
Related products
Ceramic Five (30ml)
$93.75 – $3,375.00
Ceramic One (30ml)
$40.00 – $2,000.00
Ceramic Matte (30ml)
$78.75 – $2,835.00
Ceramic Metal (30ml)
$31.25 – $750.00
Ceramic Glass (30ml)
$31.25 – $750.00
Ceramic Wheel (30ml)
$51.25 – $1,230.00
Ceramic Leather (30ml)
$40.00 – $960.00