Black Infinity Set
This product is only sold to certified installers/distributors.
Development of Self-Repairing Ceramic Coating Optimized for Black and Dark-Coloured Vehicles.
ULGO® Black Infinity is a premium ceramic coating designed specifically for black and dark-colored vehicles. Utilizing advanced raw material dispersing and synthesizing technology, it delivers unmatched molecular density and durability. Its proprietary SELF-REPAIRING TECHNOLOGY heals minor scratches, maintaining a pristine, high-gloss finish. The coating also provides exceptional protection against UV rays, chemicals, and stains, ensuring long-lasting beauty and resilience for up to 84 months.
Size: 4 Bottle – A Liquid：30ml | B-1 Liquid：15ml | B-2 Liquid：15ml | C Liquid：30ml
| Water repellency | ★★★★★ |
| Water repellent durability | ★★★★★ |
| Gloss | ★★★★★ |
| Smoothness | ★★★★★ |
| UV resistance | ★★★★★ |
| Chemical resistance | ★★★★★ |
| Applicable Material |
Paint Surface |
|---|---|
| Application |
Exterior |
| Series |
Premium |
| Industrials |
Automotive ,Aviation ,Marine |
A-Liquid: Ceramic raw material, special antifouling nano-dispersion additive, polyfluorine-based ceramic resin water repellent, low viscosity silicon oil.
B1-liquid: ceramic materials and special nanofluorine antifouling additives
B2-liquid: polymer, polyurethane
C liquid: Ceramic raw material, special antifouling dispersant, low-molecular silane, hydrocarbon solvent (hydrocarbons)
- After completing the final polishing of the body, generously apply ULGO® Degreaser to a microfiber cloth and wipe off any remaining compound residue from the surface.
- Apply ULGO® Primer evenly across the entire body using a double-action polisher with a dedicated soft urethane buff. Then, wipe off with a microfiber cloth.
- Wash the entire body of the car with ULGO® Maintenance Shampoo, thoroughly rinse with water, and then ensure complete drying.
- Pour the A-Liquid to the included microfiber applicator sponge with of this product and apply a thick layer. Work panel by panel. After application, wipe off the applied panel with a microfiber cloth after 3 to 5 minutes. (Conduct application tests and adjust the method according to the working environment to determine the best application method. Recommended settings are usually room temperature 13°C to 26°C and humidity 40% to 50%.) Ensure to wipe off cleanly without leaving any residue.
- Once the application of A-Liquid is completed, wait for more than 2 hours in a dust-free, ventilated room.
- Open the cap of B1-Liquid of this product, pour all of B2-Liquid into the bottle of B1-Liquid, attach the included inner cap, close the cap, and shake well to mix. Pour the mixed B-Liquid with the included microfiber applicator sponge and apply a thick layer. Work panel by panel. After application, spray a small amount (1 to 2 pushes) of Degreaser onto a microfiber cloth moistened with water and tightly squeezed, wipe off within 2 to 3 minutes, and then wipe clean with a dry microfiber cloth to ensure no residue of the product remains.
- Once the application of B-Liquid is completed, dry in a dust-free, ventilated room, and apply C-Liquid on the following day.
- Pour the C-Liquid onto the included microfiber applicator sponge and apply a thin layer onto the surface. Work within an area of approximately 800mm2. After application, immediately wipe clean with a dry microfiber cloth to ensure no residue of the product remains. (Applied as a finishing coat.)
- Once the application of C-Liquid is completed, allow to dry for more than 24 hours in a dust-free, ventilated room.
- Be sure to wear a mask, rubber gloves, etc. before use.
- Firmly secure the cap of the product after use and store it appropriately.
- If the medicine accidentally gets into your eyes, immediately wash out with plenty of water and see a doctor immediately.
- If swallowed by mistake, take 1 to 2 glasses of water or milk and consult a doctor immediately.
- Store between 5 to 25°C. Do not freeze.
- Keep away from sources of ignition, electrical appliances, places prone to static electricity, or anything that could cause a fire.
- Keep out of reach of children.